E-30 / E-XP2

Graco's Reactor E-Series is now upgraded with leading technology based on the H-series platform. Equipped with material data and system diagnostics, the improved E-Series gives the operator more total control. The advanced features are designed to provide longer life, less downtime and Graco reliability - and add great value to any proportioning equipment line-up.

 

Demilec are a distributor of Graco's industry leading line of Reactor proportioners. There are many models to choose from based on application, heater capacity, flow rates and more. Some Graco proportioners are specifically designed to spray polyurethane or Icynene foam, while others are suited for high pressure applications like polyurea coatings.

All Reactor proportioners or metering units are designed to mix two components at a certain ratio, which is usually but not always 1:1. Proportioners provide three main functions: keeping the desired ratio of the two materials being processed, maintaining a certain, very high pressure, and heating the materials to a certain temperature.

Modern polyurethane, polyurea or hybrid systems perform best within narrowly defined ratios. Our proportioners achieve variances of less than 1% if the temperatures and resulting viscosity are on target. The high pressures provide optimal mixing inside the spray gun. Current technology makes it almost impossible to make bad foam or coatings by having incorporated computer controls which maintain ratio, pressures and temperatures or which stop the proportioner should there be a malfunction.

New technology on performance-proven platform

Graco's Reactor E-Series is now upgraded with leading technology based on the H-series platform. Equipped with material data and system diagnostics, the improved E-Series gives the operator more total control. The advanced features are designed to provide longer life, less downtime and Graco reliability - and add great value to any proportioning equipment line-up.

 

  • Maximum output of 30 lb/min (13.5 kg/min) in foam configurations
  • Supports up to 310 ft. of Graco heated hose
  • Hybrid heater designs of up to 15.3 kW provides more efficient heat transfer to the A and B Materials
  • New electronic design with separate boards for motor, and all three heater zones

E30The Graco E-30 has revolutionized the world of Spray Polyurethane Foam with its technical advances and breakthroughs

  1. Electric motors provide superior efficiency and improved performance
  2. Pressure relief valves offer quick and easy balancing of system pressures
  3. Easy-to-service fluid sections reduce maintenance increase productivity
  4. High output heaters with maximum temperatures of up to 15,300 watts
  5. Data reporting verifies that the job was sprayed accurately
  6. Digital heat and pressure controls accurately program temperatures and pressures
  7. Balanced proportioning eliminates pressure fluctuations to give you a consistent spray pattern
  8. Dimensions: 41L x 36W x 54H in.

 

Max Working Pressure

2000 psi (138 bar, 13.8 MPa)

Min Working Pressure

600 psi (41 bar, 4.1 MPa)

Max Hose Length

310 ft (94 m)

Output

30 lb/min (13.5 kg/min)

Air Consumption @ 100 psi

Does not apply

Heater Wattage

10,200 watts and 15,300 watts

Weight

400 lbs (181 kg)

   

 

 

 

Max Working Pressure

3500 psi (240 bar, 24.0 MPa)

Min Working Pressure

Does not apply

Max Hose Length

310 ft (94 m)

Output

2.0 gpm (7.6 lpm)

Air Consumption @ 100 psi

Does not apply

Heater Wattage

15,300 watts

Weight

438 lbs (199 kg)

   

 

 

 

When talking about which spray foam or coatings applications are best suited for the Graco E-30 the answer is going to be high volume applications in the following situations:

h40Spray Foam Insulation

This machine is right for high output, large scale residential or commerical spray foam insulations.


 
 

h40Foam Roofing

No matter how large or small the roof this machine will deliver the output needed to finish the job on time


 
 

e30Rim and Band Joists

Wall insulation

 

 

 

h40In-plant OEM

Industrial maintenance

This Graco Reactors are some of the most dynamic proportioners in the industry with their ability to spray foam, polyurea, caulks, and even adhesives:

  • Spray Foam
  • Polyurea Coatings
  • Adhesives and Caulks
  • Polyurethane Coatings